BARE-Co Standard Canopy & Swing Down Beacon
BARE-Co Standard Canopy
See: HEAVY DUTY SWING-DOWN REVOLVINGBEACON below
  • 45" Wide x 60" Long (1145mm x 1524mm)
  • Moulded from virtually indestructable flexible U.V. stabilised Polyethylene
  • Purpose designed moulding to hug modern hoop type ROP Frames
  • Exclusive Bare-Co Socket Mounting System for Torsion Bars
  • NO mounting bolts pass through moulding
CANOPY KITS
CANOPIES
SINGLE KIT PART NUMBER


Includes any color canopy together with the mounting kit.

KIT No. CK3

For STANDARD WIDTH ROPs

Up to 41 1/2" (1050mm) wide

Includes Canopy and B3600  OR
 B4620 mounting kit.

 

KIT No. CK4

For OVER-WIDTH   ROPs

(some KUBOTA models)

Includes Canopy and B2565 mounting kit.
PART No.
ITEM
DESCRIPTION
WHITE CANOPY

GREEN CANOPY
ORANGE CANOPY
BLUE CANOPY
RED CANOPY
YELLOW CANOPY
MOUNTING KITS

MOUNTING KIT

Mounts the canopy to HOOP TYPE ROP Frames, CURVED or SQUARE TOP,  both RIGID or FOLDING up to 41 1/2" (1050mm) wide with leg thickness up to
3 3/16" x 2"  (82mm x 51mm)         
ILLUSTRATED AT THE TOP
Fits EMF1 Bare-Co ROP Frame

MOUNTING KIT

Same as B3600 above - EXCEPT fitting is for ROP Frames with
VERY LARGE SECTION LEGS of   4"x 4" (100 x 100),
4" x 2" (100 x 50), 5"x 2" (125 x 50) or 6"x 2" (150 x 50)
Fits Bare-Co F10 ROP Frame


Fitted to BARE-Co Cross Bar ROP
Fitted to OVERWIDTH Hoop ROP

Includes Multi Angle Mounting

MOUNTING KIT

Mounts the canopy to OVERWIDTH ROP FRAMES
Cross Bar or Leg width more than 41 1/2" (1050mm) wide.
Leg thickness from 2" x 2" (51 x 51mm) to 2" x 4" (51 x 100mm)

eg. BARE-Co F1 2 post Cross Bar type ROP frames
and extra wide hoop type ROP frames as fitted to some late Kubota models including 'Grand L' series and FORD tractors.

MOUNTING KIT

Mounts the canopy to SMALL 4 POST ROP FRAMES

Up to 41 1/2" (1050mm) wide or for adaptation to Non-standard Industrial Applications


HEAVY DUTY SWING-DOWN REVOLVING BEACON

Heavy duty swing-down revolving beacon.
Quick Release knob allows the unit to swing down for working under trees.
This is a heavy duty, industrial quality unit.

Replacement parts available.
Fits all Bare-Co polyethylene canopies
(Standard & Senior)
Part No.
Description
12 Volt Full Kit (excludes switch & wiring)
24 Volt Full Kit (excludes switch & wiring)